Product Overview
Reliable custom rubber parts for industrial applications
Quick Answer
OEM 6RD955998 automotive EPDM oval dual-hole wire grommet is a molded rubber component for wire harness routing, panel hole protection, edge isolation and splash protection in vehicle assemblies. Overall size, dual-hole diameter, panel fit, groove width, EPDM compound, Shore A hardness, tolerance and packaging can be customized according to drawings or samples.
The OEM 6RD955998 automotive EPDM oval dual-hole wire grommet is a molded rubber component used for wire harness routing, panel hole protection and sealing support in vehicle assemblies. Its oval body and dual-hole structure help organize two wire or tube paths through a compatible opening. Dimensions, hardness, tolerance and packaging should be confirmed by drawing, sample or installation requirements.
OEM 6RD955998 Automotive EPDM Oval Dual-Hole Wire Grommet — Genuine VW Group Rubber Seal
The OEM 6RD955998 is a genuine Volkswagen group automotive rubber grommet molded in EPDM, featuring an oval body with two separate holes designed to seal a pair of wires, cables, or small hoses passing through the same panel or body opening. This dual-hole oval design allows a single grommet to manage two circuits at once, commonly used in body harness pass-through points, firewall openings, or washer/wiring assemblies where two lines need to be routed and sealed together.
Key Specifications
| Parameter | Typical Specification |
|---|---|
| Part Number | 6RD955998 |
| Type | Genuine Volkswagen group rubber grommet |
| Shape | Oval, dual-hole design |
| Material | EPDM rubber |
| Function | Seals two wires/cables/hoses through a single panel opening |
| Temperature Resistance | Wide range typical of EPDM, good heat and cold tolerance |
| Weather Resistance | Strong ozone, UV, and weathering resistance |
| Category | OEM automotive sealing/grommet component |
What Is Part Number 6RD955998?
Part number 6RD955998 identifies a genuine Volkswagen group EPDM rubber grommet built with an oval body and two internal holes, allowing two separate wires or small hoses to pass through one sealed opening in a vehicle panel or firewall. The “6RD” prefix is associated with certain VW group vehicle platforms in the parts catalog, so this grommet is designed to match the exact mounting hole and dual-wire routing configuration used at that specific location on the applicable models. Because it is a factory-specified EPDM component, it is engineered to maintain a tight seal and flexible fit across the vehicle’s operating temperature range for the life of the harness assembly.
Why EPDM Material
EPDM (ethylene propylene diene monomer) rubber is a common choice for automotive wire and cable grommets because of its strong resistance to weathering, ozone, and UV exposure, all of which are relevant for components exposed to engine bay or underbody conditions. EPDM also maintains flexibility across a wide temperature range, helping the grommet keep its seal integrity in both cold winter starts and hot engine bay conditions. Compared with general-purpose rubber compounds, EPDM offers better long-term aging resistance, which is important for a sealing component that is not typically replaced during routine maintenance.
Key Features
- Genuine Volkswagen group manufactured component for guaranteed OEM fitment.
- Oval dual-hole design allows two wires, cables, or hoses to pass through one sealed opening.
- EPDM rubber construction for strong weather, ozone, and UV resistance.
- Maintains flexibility and sealing performance across a wide operating temperature range.
- Designed as a direct OEM replacement matching factory dimensions and tolerances.
Single-Hole vs Dual-Hole Oval Grommets
| Type | Best For | Notes |
|---|---|---|
| Dual-Hole Oval Grommet (6RD955998) | Two wires/hoses through one panel opening | Keeps both circuits organized and sealed together |
| Single-Hole Round Grommet | One wire or hose | Simpler routing, single circuit only |
| Single-Hole Oval Grommet | One flat cable or wide cord | Wider single opening, not dual-sealed |
Common Applications
- Firewall or body panel pass-through where two wiring circuits run together.
- Washer fluid line and wiring harness combined routing points.
- Engine bay to cabin dual-circuit sealing locations.
- Underbody wiring and small hose dual pass-throughs on applicable VW group models.
Why Choose Genuine OEM Grommets
Genuine Volkswagen group parts like 6RD955998 are manufactured to the exact specification used in original vehicle assembly, ensuring correct fit, sealing performance, and long-term durability compared with generic aftermarket alternatives. Because this grommet manages two separate wires or hoses in a single dual-hole design, an exact OEM match is especially important, as a mismatched aftermarket grommet could leave one or both openings improperly sealed. Confirming the exact part number against your vehicle’s parts catalog or VIN-based lookup is recommended before ordering, since dual-hole grommet part numbers can vary by platform, model year, and harness configuration.
Sourcing and Ordering Notes
When ordering part number 6RD955998, verify compatibility using your vehicle’s VIN or the official VW group parts catalog, since “6RD” series parts are tied to specific platform assemblies and may not be interchangeable across all models. Confirming both the panel hole dimensions and the diameter of the two wires or hoses being routed can help ensure a proper fit before installation.
FAQ
What is the OEM 6RD955998 automotive EPDM oval dual-hole wire grommet used for?
It is used for automotive wire harness routing, panel hole protection and edge isolation where the 6RD955998 reference part is required. The oval body fits a compatible panel opening, while the dual-hole structure helps guide two wires, tubes or harness branches.
Can the dimensions be customized?
Yes. Overall length, overall width, panel hole fit, groove width, dual-hole diameter, hole center distance, wall thickness and tolerance can be customized according to drawings, OEM specifications or physical samples. Unsupported dimensions should not be assumed because installation fit depends on confirmed size data.
Is this a genuine OEM part?
This page describes a custom or replacement rubber grommet identified by OEM reference number 6RD955998. Reference numbers are used for identification and compatibility review only. Buyers should confirm whether they require aftermarket production, replacement supply or official OEM sourcing.
Why is EPDM used for this automotive wire grommet?
EPDM is often selected for automotive grommets because it can support flexibility, weather resistance, ozone resistance and water exposure resistance. The final EPDM compound should still be confirmed according to temperature, compression, installation position, contact media and documentation requirements.
Is tooling required for this grommet?
Tooling may be required if no existing mold matches the confirmed 6RD955998 grommet geometry. Tooling cost depends on the drawing and product structure. A physical sample, 3D model or confirmed OEM specification helps evaluate tooling and sample requirements.
Are samples available before bulk production?
Samples are available upon request. Sample preparation depends on confirmed dimensions, EPDM compound, Shore A hardness, color, tooling status and inspection requirements. A physical sample or drawing is recommended before batch production to verify panel fit and dual-hole alignment.
Request a Custom Quote
Send your OEM 6RD955998 automotive EPDM oval dual-hole wire grommet drawing, original sample, installation photo, 3D model or specification for review. Please include dimensions, panel thickness, wire size, hardness, application environment, quantity, annual demand, documentation requirements and packaging method.
